Main Office: 724-593-2411


Motorola DTA Remote Setup

Programming Your TV
Before setting up the remote:
Turn on the TV or DEVICE you wish to program.
 +  1. Press and hold OK, then MUTE together until the LED illuminates.
2. Press and hold the CH UP button until the TV turns off. While you are pressing the CH UP button, the LED will blink. As soon as the TV turns off, release the CH UP button.
3. Press MUTE. If the TV that turned off…
a. Turns back on, press OK to lock in this code. The LED will blink and go out.

then
b. Does not turn back on, press CH DOWN one step at a time until the TV turns back on. Each time you press the CH DOWN button, the LED will blink.
Once you have found a code that turns the device on / off, press OK to lock in this code. The LED will blink and go out.
Setup Volume Control
 +  1. Press and hold DTA, then OK together until the LED illuminates.

then
2. Press VOL UP, then TV for TV volume.
3. The LED will blink and go out.
Additional Resources